Painel SPD - 100kA por fase - Em 20kA
- Prosurge
- China
- 30 dias após receber o pagamento
- 3000 peças por mês
Os SPDs de painel da série PROSURGE 20PSPB são dispositivos de proteção contra surtos (SPDs) de tamanho compacto listados pela UL projetados para proteger sistemas de distribuição elétrica monofásicos e multifásicos contra os efeitos nocivos de surtos transitórios.
Características:
UL 1449 4th &CSA C22.2 Tipo 1 SPDs com SCCR até 200kArms sem fusível externo ou CB
UL 1449 4th &CSA C22.2 Tipo 2 SPDs com rastreamento de onda senoidal
Corrente de descarga nominal: 10kA (8/20μs)
Corrente de pico máxima: 100kA (8/20μs) por fase
Classificação de corrente de curto-circuito SCCR: 200kArms - testado sem disjuntor externo ou fusível
Proteção completa dos modos
Indicação de falha de degradação
Com Alarme Remoto
Com contador de eventos de surto
Gabinete de plástico NEMA 4X
T2F: UL tipo 2 SPD com rastreamento de onda senoidal 20UMA:Alarme Remoto is constructed with Prosurge’s patented PTMOV (20PTMOV), which has a thermally protected and arc extinguishing technology as the core of Prosurge’s competency. PSP B has a significant advantage in abnormal over-voltage & high fault current safety and thus ensure industry’s highest level of safety and performance.
PSP B is tested and listed as UL1449 4th, C22.2 Type 1 and Type 2 SPD (with sine wave tracking function). It is constructed in a NEMA 4X plastic enclosure to ensure that dirt, dust and water are resisted for either indoor or outdoor usage, and with indicator and two colored LEDs to demonstrate the power & protection status of protected power phase.
Typical Applications:
Commercial
Industrial
Communications
Renewable energy
Critical power (hospitals, data centers, etc)
General Specification:
Category | PSP B |
Certification | ANSI/UL1449 4th edition CSA C22.2, Type1, Type 2 SPD |
Connection Type | Parallel Connected |
Surge Capacity | 100kA per Phase |
Nominal discharge current In | 10kA |
SCCR | 200kArms |
Sine wave tracking | Optional for UL Type 2 listed |
Power Status Indication | Normal = Power LED ON |
Working Status Indication | Fail = Surge protection LED ON |
Power Connecting | 12 AWG, 762mm (30”) length |
Signal cable | 16 AWG, 762mm (30”) length (C=red; NC=blue; NO=brown) |
Working environments | Temperature –40℃～+75℃, Humidity relative 5~95% (25℃) , Altitude≤3km |
Dimensions (W x D x H) | 162 x 80 x 76 mm |
Threaded NPT | 1/2"NPT |
Enclosure | Plastic enclosure, NEMA 4X |
Net Weight | 0.47 kg |
Configure & Ordering Information:
PSP Model series
| 277Y Voltage and system configuration | C Protection mode | 12 Surge capacity
| / T1 SPD Category | A Function
|
PSP | 120SP: 120/240V split 240SP:240/480V split 120Y:120/1208V WYE 277Y: 277/480V WYE 120H: 120/240V high leg delta 240D: 240V delta 120S:120V 1ph, 2W+G … | C: Delete N-G protection mode
| 12: 50kA per phase
| T1: UL type 1 SPD T2F: UL type 2 SPD with sine wave tracking
| A: Remote Alarm |
